How to Use: G360 Super Fast Compound

Farécla compounds, polishes and waxes will typically include recommended applicators on the product packaging. In some cases, these recommendations may be abbreviated or omitted due to limited packaging space.

These "How to Use" pages provide a broader overview of recommended compound and applicator combinations, helping users understand the expected cut speed, finish level and recommended machine speeds and handling methods for both Rotary and Dual Action polishing applications where applicable.

The "Cut Speed" and "Finish Level" shown throughout our website, process guides and upgraded G Mop packaging should be treated as general guidance only. Results and performance will vary depending on several factors including substrate type and condition, coating age and hardness, machine settings, polishing technique and overall process used.

These recommendations are intended to provide a practical starting point for users selecting suitable polishing combinations. For more specific product guidance tailored to your application, Farécla recommends using the Solutions Finder or following the dedicated process guides supplied for system-based products such as the G360 Super Fast System.

As with any polishing process, users should assess the level of correction required before polishing and select the least aggressive applicator capable of achieving the desired result.

A Rotary polisher spins in a continuous circular motion, creating a direct and aggressive polishing action that is ideal for faster defect removal and heavier cutting applications.

A Dual Action (DA) polisher combines rotary and oscillating movements, producing a smoother and generally less aggressive polishing action that is commonly used for refining and finishing.

Although Rotary polishing will typically deliver a heavier cut, actual polishing performance depends on a range of factors including substrate type and condition, compound and applicator selection, machine speed, user handling and machine throw. In some spot repair situations, smaller orbit Dual Action machines such as the G Plus Mini Dual Action Polisher may achieve both rapid correction and a high finishing performance when head to head against its rotary counterpart.

Several G Mop applicators can be used across both Rotary and Dual Action polishing systems. Users should check product packaging and the product listings for compatibility guidance and recommended operating instructions.

Both machine types are capable of achieving high quality correction and finishing results in skilled hands. The choice between Rotary and Dual Action polishing often depends on the application, substrate condition, working area and operator preference.

Many Farécla process guides and solutions are designed around a preferred machine type. However, users with access to both Rotary and Dual Action polishers may mix and match recommended processes and product combinations according to operator preference and application requirements to achieve optimal results.

Both the Rotary and Dual Action G360 Super Fast processes are designed to deliver rapid defect removal and a high gloss finish, but they differ in machine action and recommended applicators for certain stages of the process.

HIGH CUT - To remove P1500 or finer sanding marks
This stage eliminates P1500 sanding marks from conventional low bake clear coats and prepares the surface for MEDIUM CUT polishing.

• Rotary - G360 Super Fast Compound with a G Mop Super High Cut Pad [RED]
• Dual Action - G360 Super Fast Compound with a G Mop Super High Cut Pad [WHITE] 

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

MEDIUM CUT - To remove process marks and medium defects such as swirls and light scuffs
This stage rapidly eliminates heavier swirls and holograms, leaving an excellent gloss finish on light colours while preparing dark colours for FINE CUT polishing.

• Rotary & Dual Action - G360 Super Fast Compound with a G Mop Angled Yellow Compounding Foam

FINE CUT - To remove fine defects such as holograms and light swirls while enhancing gloss levels
This stage further enhances gloss levels on light colours while rapidly eliminating light swirls and holograms on dark colours for an enhanced deep gloss finish.

• Rotary - G360 Super Fast Finish with a G Mop Angled Black Finishing Foam
• Dual Action - G360 Super Fast Finish with a G Mop Dual Action Finishing Foam

The recommended finishing pads for Rotary and Dual Action polishing are designed to offer optimal handling, machine stability and airflow characteristics for their respective machine actions.

Broadly speaking, Rotary polishing is commonly favoured for fast and consistent higher correction performance, while Dual Action polishing is often preferred for increased control and enhanced finishing characteristics.

The choice between Rotary and Dual Action polishing will depend on operator preference, substrate condition, working area and the finish standard required. Users with access to both machine types may also combine elements of each process to suit the application and optimise overall performance.

For further details, see:

• Process Guide: G360 Super Fast System for ROTARY Polishers
• Process Guide: G360 Super Fast System for DUAL ACTION Polishers
• What is the difference between the "RED" and "WHITE" G Mop Super High Cut Pads?

Farécla offers two types of G Mop Super High Cut Pad(s):

The RED Pad
150 mm Range: GMC650 (78072700153) 
Introduced alongside G360 Super Fast Compound, this pad is recommended for use with ROTARY polishing processes.

The WHITE Pad
150 mm Range: GMC660 (66254427056)
180 mm Range: GMC760 (66254427057)
Introduced in 2026, this pad is recommended for use with DUAL ACTION polishing processes.

Both pads are designed for use with G360 Super Fast Compound and will remove P1500 or finer sanding scratches when used as part of the correct process.

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

For best performance, Farécla recommends:
GMC650 – Rotary use ONLY
GMC660 & GMC760 – Dual Action use ONLY

Further guidance is available in the related FAQs: 

• Can GMC650 be used with a DUAL ACTION Polishing Machine?
• Can GMC660 be used with a ROTARY Polishing Machine?

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC650 and GMC660 incorrectly suggest cross-use between rotary and dual action polishing machines. Artwork has been updated, and future production runs will carry the revised information

For optimal results, particularly on darker colours, it’s recommended to follow on with G360 Super Fast Finish after using G360 Super Fast Compound.

Not necessarily. Whether a follow-up step with a Dual Action (DA) polisher is required may depend on the operator’s familiarity and confidence using a Rotary polisher during finer polishing stages, the desired finish standard and whether access or budget allows for multiple machine types.

A Rotary polisher is highly effective for both correction and finishing when used with the appropriate compound, applicator and technique. In many applications, experienced operatives can achieve a high gloss, hologram-free finish using Rotary polishing alone.

However, some users may choose to further refine the finish with a Dual Action polisher and a finer polish or finishing pad, particularly on darker colours, softer substrates or where an exceptionally high final finish is required.

Bodyshops have traditionally favoured Rotary polishing systems, meaning many Farécla process guides and recommendations have historically been built around a single machine type. As Dual Action polishing continues to see wider adoption across the industry, particularly within vehicle detailing and enthusiast markets, Farécla processes and recommendations are being expanded to include more Dual Action guidance and combinations.

Broadly speaking, users with access to both machine types may adapt or combine recommended processes according to operator preference, substrate condition and required finish level - for example using Rotary polishing for heavier correction stages before refining with a Dual Action polisher during final finishing steps.