G Mop Super High Cut Pad [RED]

Farécla offers two types of G Mop Super High Cut Pad(s):

The RED Pad
150 mm Range: GMC650 (78072700153) 
Introduced alongside G360 Super Fast Compound, this pad is recommended for use with ROTARY polishing processes.

The WHITE Pad
150 mm Range: GMC660 (66254427056)
180 mm Range: GMC760 (66254427057)
Introduced in 2026, this pad is recommended for use with DUAL ACTION polishing processes.

Both pads are designed for use with G360 Super Fast Compound and will remove P1500 or finer sanding scratches when used as part of the correct process.

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

For best performance, Farécla recommends:
GMC650 – Rotary use ONLY
GMC660 & GMC760 – Dual Action use ONLY

Further guidance is available in the related FAQs: 

• Can GMC650 be used with a DUAL ACTION Polishing Machine?
• Can GMC660 be used with a ROTARY Polishing Machine?

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC650 and GMC660 incorrectly suggest cross-use between rotary and dual action polishing machines. Artwork has been updated, and future production runs will carry the revised information

Although similar in appearance, GMC650 (the RED G Mop Super High Cut Pad) and GMC660 (the WHITE Pad) differ in use:

When using a Dual Action Polishing Machine, Farécla advises keeping the pad and machine flat to the surface. 
GMC650 is designed to be used at a slight angle. 
For that reason, Farécla does NOT recommend using GMC650 with dual action polishing machines.

A skilled operator may still achieve acceptable results when using GMC650 on a dual action machine if correct polishing practices are followed. However, performance is likely to fall below expectations in both cut and finish, and handling may be less controlled.

GMC660 is optimised for dual action polishing. It performs more consistently when used flat and runs cooler in this application compared to GMC650.

See: G Mop Super High Cut Pad (White) for Further Details

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC650 incorrectly states Dual Action compatibility. Artwork has been updated, and future production runs will carry the revised information

The "Cut Speed" & "Finish Level" presented on our product pages, upgraded G Mop packaging and infographics are intended as a rough guideline. Pad Performance and Results are dependent on numerous factors including the polish used, the surface / substrate being polished, machine speeds and user handling. 

The products presented below are recommended for use with this applicator. In some cases there may be alternative applicator recommendations from Farécla to achieve a faster cut or a higher finish with that compound.

Farécla's Compounds, Polishes and Waxes will have recommended applicators either on the product packaging, process guides or in the supplemental material available on our website (product pages, solutions etc.).

Farécla advises following the process and products the compound / polish / wax recommends. Users should assess the level of correction needed before polishing, aiming to use the least aggressive pad that will still remove imperfections effectively.

When adjusting the process with alternative, non-recommended pads, Farécla recommended testing in a small or inconspicuous area first to ensure you are going to achieve the desired finish.

Farécla also offers accessories designed to improve the longevity and handling of applicators, and polishing machines; specially developed and specced to deliver optimal performance when used with our compounds and applicators.