G Mop Super High Cut Pad [WHITE]

Farécla offers two types of G Mop Super High Cut Pad(s):

The RED Pad
150 mm Range: GMC650 (78072700153) 
Introduced alongside G360 Super Fast Compound, this pad is recommended for use with ROTARY polishing processes.

The WHITE Pad
150 mm Range: GMC660 (66254427056)
180 mm Range: GMC760 (66254427057)
Introduced in 2026, this pad is recommended for use with DUAL ACTION polishing processes.

Both pads are designed for use with G360 Super Fast Compound and will remove P1500 or finer sanding scratches when used as part of the correct process.

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

For best performance, Farécla recommends:
GMC650 – Rotary use ONLY
GMC660 & GMC760 – Dual Action use ONLY

Further guidance is available in the related FAQs: 

• Can GMC650 be used with a DUAL ACTION Polishing Machine?
• Can GMC660 be used with a ROTARY Polishing Machine?

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC650 and GMC660 incorrectly suggest cross-use between rotary and dual action polishing machines. Artwork has been updated, and future production runs will carry the revised information

Although similar in appearance, GMC660 (the WHITE G Mop Super High Cut Pad) and GMC650 (the RED Pad) differ in use:

When using a Rotary Polishing Machine, Farécla advises using the pad at a slight angle to the surface.
GMC660 is designed to be used flat.
For that reason, Farécla does NOT recommend using GMC660 with rotary polishing machines.

A skilled operator may still achieve acceptable results when using GMC660 on a rotary machine if correct polishing practices are followed. However, performance is likely to fall below expectations in both cut and finish, and additional spurring may be required to maintain.

GMC650 is optimised for rotary polishing. It performs more consistently when used at a slight angle and provides better control in this application compared to GMC660.

See: G Mop Super High Cut Pad [RED] for Further Details

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC660 incorrectly states Rotary compatibility. Artwork has been updated, and future production runs will carry the revised information

The "Cut Speed" & "Finish Level" presented on our product pages, upgraded G Mop packaging and infographics are intended as a rough guideline. Pad Performance and Results are dependent on numerous factors including the polish used, the surface / substrate being polished, machine speeds and user handling. 

The products presented below are recommended for use with this applicator. In some cases there may be alternative applicator recommendations from Farécla to achieve a faster cut or a higher finish with that compound.

Farécla's Compounds, Polishes and Waxes will have recommended applicators either on the product packaging, process guides or in the supplemental material available on our website (product pages, solutions etc.).

Farécla advises following the process and products the compound / polish / wax recommends. Users should assess the level of correction needed before polishing, aiming to use the least aggressive pad that will still remove imperfections effectively.

When adjusting the process with alternative, non-recommended pads, Farécla recommended testing in a small or inconspicuous area first to ensure you are going to achieve the desired finish.

Farécla also offers accessories designed to improve the longevity and handling of applicators, and polishing machines; specially developed and specced to deliver optimal performance when used with our compounds and applicators.