About: G3 Premium
G3 Premium Abrasive Compound is a versatile liquid formula that removes P1500 or finer sanding marks from all modern paint systems, delivering a swirl-free, high-gloss finish with reduced product use.
Its transparent nature allows clear visibility of the work area while compounding, ensuring precise results.
Suitable for both cutting and finishing, use with a G Mop High Cut Foam at 900-1300 rpm for defect removal, and follow with a G Mop Finishing Foam to eliminate swirls and enhance gloss on darker colours.
SKU(s)
Use With...
150 mm & 200 mm | The G Mop High Cut Foam provides a high cut and rapid finish and is ideal for working larger areas.
75 mm & 150 mm | Eliminates sanding scratches and swirls when used with medium to high cut compounds on paint, lacquer and GRP finishes.
75 mm & 150 mm | The G Mop Finishing Foam range has been specially designed for their excellent high gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Finishing Compounds and Waxes .
For 150 mm & 200 mm Pads | The G Mop Flexible Back Plate adds additional flexibility to Farécla's range of compounding and finishing foams - allowing for improved handling performance, increased performance and increased pad life.
Follow On With...
G3 Fine Finishing Compound offers rapid and permanent removal of minor surface defects, holograms and swirl marks from all modern paint systems. Superb on dark colours.
G3 Wax Premium Liquid Protection is a finishing wax specifically developed for trade use; quick and easy to apply and provides a durable, high gloss finish on fully cured paintwork.
Clean and Protect is an easy to use “wipe on, wipe off” product - rapidly removing contaminants from paint, glass, rubber and plastics, whilst leaving a silicone-free layer of protection to the surface
G360 Super Fast Compound is designed to rapidly eliminate sanding marks and minor defects from painted and lacquered automotive surfaces.
FAQs & How to Use
Farécla G3 Premium Abrasive Compound - How to Use | @fareclaproductsltd
How to Use: G3 Premium How to Use: G3 Premium
STEP 1 - CUT
1. Attach a G Mop Compounding Foam to a polishing machine
2. Shake bottle well before use
3. Dispense a small quantity of product onto surface or polishing pad
4. Compound at 900 - 1300rpm
5. Wipe clean with a G Plus Finishing Cloth
STEP 2 - FINISH (if desired)
Use the same process as with STEP 1: CUT but use a G Mop Finishing Foam (800 to 1100rpm) and a small quantity of G3 Premium Abrasive Compound
What's the Difference Between G3 Premium and G360 Super Fast Compound? What's the Difference Between G3 Premium and G360 Super Fast Compound?
If you’re an existing G3 Premium user you may be wondering what the difference is between your current compound and G360 Super Fast Compound. In short you will experience a faster cut rate and superior final gloss.
The G360 Super Fast System was developed as a system to remove the need for expensive P3000 grit sanding discs by providing revolutionary cutting and finishing abilities, rather than a G3 Premium replacement. That said, many G3 Premium users have switched across for the benefits the new system delivers.
G360 was developed to be easy to use, offering a number of benefits over sanding beyond P1500; G360 Compound is transparent in use, making it easy to see the defect/sanding marks being worked on and removed. Through faster polishing times, reduced steps and use of only light pressure operatives also have reduced exposure to Hand Arm Vibration risk and muscle fatigue compared to alternative systems. The cost savings of no longer needing
G360 Compound is one component of the G360 Super Fast System which, on the compounding side, includes the G Mop Super High Cut Pad, a revolutionary wool fibre based pad developed in conjunction with the liquid G360 Compound and a G Mop Yellow Compounding Foam for a second stage.
Like G3 Premium, G360 Super Fast Compound is used with two different pads as part of the recommended process. The optional step of G360 Super Fast Finish with a Finishing Foam enhances the gloss further, particularly on darker colours.
What's the difference between the G3 Premium System and the G3 Extra System? What's the difference between the G3 Premium System and the G3 Extra System?
Farécla’s G3 Premium System is designed to be used on Ultra High Solids and Scratch Resistant Clearcoats and should be applied with foam pads, whilst the G3 Extra System works with Medium and High Solids paint systems using wool applicators.
What is Farécla G3 Premium used for? What is Farécla G3 Premium used for?
Farécla G3 Premium is a liquid abrasive compound designed for professional bodyshops to remove P1500+ sanding marks from modern paint systems. It can be used for both cutting and finishing by simply changing the applicator pad.
How do I switch from cutting to finishing with G3 Premium? How do I switch from cutting to finishing with G3 Premium?
To switch from cutting to finishing, simply change the pad type. Use a wool or high cut foam pad for cutting and a polishing foam pad for finishing.
What polishing pads are recommended for G3 Premium? What polishing pads are recommended for G3 Premium?
Our high cut foam or yellow compounding foam pads are recommended for cutting, followed by a black finishing foam to finish, or for lighter defects.