G Mop Angled Yellow Compounding Foams
See SKU(s) | GMC622 (78072769182)
G MOP ANGLED YELLOW COMPOUNDING FOAMS
- Eliminates sanding scratches and swirls
- Use with medium to high cut compounds
- Use on paint, lacquer and GRP finishes
- Size(s): 150 mm & 180 mm - See SKU(s)
- Hook & Loop Backing
- See Below for "Use With" Recommendations
About: G Mop Angled Yellow Compounding Foams
The G Mop Yellow Angled Compounding Foam pad provides an improved cut and gloss of our standard yellow pads, with enhanced handling over our flexible yellow pads;
The angled design offers excellent handling plus greater visibility and control, especially at panel edges and around awkward areas such as door handles and mirrors.
The combination of pore size and open cell structure provides enhanced cut, a lower operating temperature and minimal product throw-off.
Excellent durability – For optimum performance and pad longevity, use with the G Mop Flexible Back Plate
Also Available: G Mop Angled Finishing Foam
Use With…
"Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator? "Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator?
The "Cut Speed" & "Finish Level" presented on our product pages, upgraded G Mop packaging and infographics are intended as a rough guideline. Pad Performance and Results are dependent on numerous factors including the polish used, the surface / substrate being polished, machine speeds and user handling.
The products presented below are recommended for use with this applicator. In some cases there may be alternative applicator recommendations from Farécla to achieve a faster cut or a higher finish with that compound.
Farécla's Compounds, Polishes and Waxes will have recommended applicators either on the product packaging, process guides or in the supplemental material available on our website (product pages, solutions etc.).
Farécla advises following the process and products the compound / polish / wax recommends. Users should assess the level of correction needed before polishing, aiming to use the least aggressive pad that will still remove imperfections effectively.
When adjusting the process with alternative, non-recommended pads, Farécla recommended testing in a small or inconspicuous area first to ensure you are going to achieve the desired finish.
Farécla also offers accessories designed to improve the longevity and handling of applicators, and polishing machines; specially developed and specced to deliver optimal performance when used with our compounds and applicators.
Recommended Compounds (Automotive Refinishing)
G360 Super Fast Compound is designed to rapidly eliminate sanding marks and minor defects from painted and lacquered automotive surfaces.
G3 Premium Liquid Abrasive Compound removes P1500+ sanding marks from modern paint systems. Ideal for cutting and finishing, leaving a high-gloss, swirl-free result.
G3 Extra Plus Abrasive Compound is a high quality, fast cutting, step 1 product for the removal of P1500 or finer sanding marks from all modern paint systems.
Recommended Compounds (Marine and Industrial)
Profile 350 PREMIUM Liquid, an exceptional boat polish, efficiently eliminates sanding marks, rejuvenates gel coat surfaces, and achieves a superior high gloss finish. Especially effective on dark colours, this versatile product serves as a comprehensive one-step solution or can be integrated into a two-step compounding process to attain an even higher gloss and minimise swirl marks.
Profile 400 ADVANCED PLUS Fast Medium Liquid Compound eliminates P1500 sanding marks and defects from paint, lacquer, acrylic, plexiglass and gelcoat surfaces, leaving a high gloss.
Recommended Back Plate, Machine & Applicator Pairings
150 mm Range: GMB146 / GMB586 / GMB166
75 mm Applicator: GMC622
Polisher: GPT002 / GPT003 or GPT050
150 mm Applicator: GMC722
75 mm Applicator: GMC622
Polisher: GPT202 / GPT203 or GPT250
150 mm Applicator: GMC722
Use with a Dual Action Polishing Machine with a 21 mm Throw
Enhance Performance and Improve Pad Longevity
For 150 mm & 200 mm Pads | The G Mop Flexible Back Plate adds additional flexibility to Farécla's range of compounding and finishing foams - allowing for improved handling performance, increased performance and increased pad life.
The G Plus Spurring Brush is designed for manually cleaning G Mop pads and foams - unclogging foam cells to ensure no drop in cut or gloss and avoiding residue, dried compound and other contaminants impairing your next job.
SKU(s)
G Mop Compounding Foams
75 mm & 150 mm | Eliminates sanding scratches and swirls when used with medium to high cut compounds on paint, lacquer and GRP finishes.
75 mm | The grade of foam used by the G Mop Premium Compounding Foam provides the best results for cut, gloss and handling – exceeding the already high standard of our existing G Mop 75 mm / 3″ Range mini applicators.
150 mm & 180 mm | The G Mop Yellow Angled Compounding Foam provides an improved cut and gloss of our standard yellow pads, with enhanced handling over our previous flexible yellow pads.
200 mm | The G Mop Waffle Compounding Foam is a new soft-backed, waffle-faced compounding foam.
G Mop Finishing Foams
75 mm & 150 mm | The G Mop Finishing Foam range has been specially designed for their excellent high gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Finishing Compounds and Waxes .
75 mm | The G Mop Premium Finishing Foam delivers the best results for gloss and handling – exceeding the already high standard of our existing G Mop 75 mm / 3″ Range mini applicators.
150 mm | The G Mop Angled Finishing Foam uses a new grade of foam which is slightly firmer than the grade used in previous Farécla Finishing Foams
200 mm | The G Mop Waffle Finishing Foam is a new soft-backed, waffle-faced compounding foam.
Recent Changes
| Variant | Format | FPL Part No. | SGA UPC | Barcode | Carton Qty |
|---|---|---|---|---|---|
| 150 mm / 6 in (Flexible) | Pack of 2 Foams | GMC624 | 78072700152 | 842090101379 | 12 Pack(s) |