How to Polish HS and UHS Automotive Paints
In the demanding world of automotive bodyshop work, achieving a flawless finish on various types of modern paints can be a complex task. The range of coatings, including HS (High Solids), UHS (Ultra High Solids), and Ceramic Clearcoats, presents unique challenges in polishing that require both precision and efficiency.
Farécla's G360 Super Fast system has become a firm favourite among bodyshop professionals for addressing these challenges. Designed specifically for rapid rotary polishing, this system offers unparalleled speed and effectiveness. Its unique formulation and technology enable it to work seamlessly on all modern paints, allowing for a smooth, high-gloss finish in less time and with fewer steps.
High Cut - To remove P1500 or finer sanding marks
-
Step 1: G360 Super Fast Compound
Apply product, use only a small amount -
Step 2: Polishing
Using the G Mop SUper High Cut Pad, start with minimal pressure at 1500 rpm slightly angled and end at 900 rpm with the pad held flat -
Step 3: Check
Clean and check. The P1500 sanding marks from all conventional clear coats (low temperature) should now be removed and you are ready for medium cut polishing.
Medium Cut - To remove process marks and medium defects
-
Step 1: G360 Super Fast Compound
Apply product, use only a small amount -
Step 2: Polishing
Using a G Mop Yellow Compounding Foam, polish at 900 - 1300 rpm, keeping the pad flat -
Step 3: Check
Wipe clean with a G Plus Finishing Cloth.
Fine Cut - To remove fine defects (e.g. holograms and light swirls) and enhance gloss
-
Step 1: G360 Super Fast Finish
Apply product, use only a small amount -
Step 2: Polishing
Polish, with a G Mop Finishing Foam, at 800 - 1100 rpm, keeping the pad flat -
Step 3: Check
Wipe clean with a G Plus Finishing Cloth.
Final Cleaning and Protection
-
Step 1: Spray
Spray a light mist on the surface. -
Step 2: Wipe
Wipe clean with a G Plus Finishing Cloth. -
Step 3: Buff off
Use a clean, dry G Plus Finishing Cloth to buff to a high shine.
Products Used in This Solution
-
G360 Super Fast Compound is designed to rapidly eliminate sanding marks and minor defects from painted and lacquered automotive surfaces.
-
The G Mop Super High Cut Pad, developed in conjunction with G360 Super Fast Compound, eliminates P1500 sanding marks and removes the need for costly P3000 sanding discs.
-
The G Mop Compounding Foam range has been specially designed for their excellent cut and gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Compounds and Polishes.
-
G360 Super Fast Finish is designed to rapidly eliminate swirls and holograms from painted and lacquered automotive surfaces - ideal on darker colours after using G360 Compound.
-
The G Mop Finishing Foam range has been specially designed for their excellent high gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Finishing Compounds and Waxes .
-
G Plus Finishing Cloths are ideal for quick cleaning and drying jobs. Its microfibre technology grips dust and small dirt particles, and the cloth’s edgeless finish prevents damaging and scratches.
-
Clean and Protect is an easy to use “wipe on, wipe off” product - rapidly removing contaminants from paint, glass, rubber and plastics, whilst leaving a silicone-free layer of protection to the surface
