How to Clean Chrome Trims and Tailpipes
Wiping G3 Pro All-in-One polish with a cloth onto a dirty tailpipe

G3 Pro All-In-One Polish is a highly versatile product; the high spec compounding technology built into this polish which restores the condition of many different surfaces and coatings including paint, lacquer, lightly stained chrome and aluminium.

Clean with All-in-One Polish
Products Used
Where to get these products
FAQs

Clean with All-in-One Polish

Close up of a dirty tailpipe

Recommendation: Wash first

We recommend rinsing the tailpipe beforehand as part of a regular wash and removing some major impurities before using the All-in-One polish.
G3 Pro All-in-One Polish being applied to a microfibre cloth

Apply to a cloth

Shake the bottle and apply a small amount of G3 Pro All-in-One Polish to a clean microfibre cloth.
Wiping G3 Pro All-in-One polish with a cloth onto a dirty tailpipe

Polishing...

Rub the polish over the tailpipe.
Close up of a shiny tailpipe

...and buff off to a shine!

Turn the cloth and wipe off the remaining polish.

Products Used

G3 PRO ALL-IN-ONE POLISH - Photo of 500 ml size SKU on a White Background
G3 Pro All-in-One Polish

G3 Pro All-in-One Polish removes swirls, holograms, minor defects and leaves a high gloss shine

G Plus Microfibre Cloths - Photo of folded Grey, Blue and Yellow Cloths on a White Background. Table at bottom reads Yellow 3PK 100PK, Blue 100PK and Grey 100PK
G Plus Microfibre Finishing Cloth(s)

G Plus Finishing Cloths are ideal for quick cleaning and drying jobs. Its microfibre technology grips dust and small dirt particles, and the cloth’s edgeless finish prevents damaging and scratches. 

Where to get these products

FAQs

How to Use: G3 Pro All-in-One Polish How to Use: G3 Pro All-in-One Polish

1. Wash and dry surface thoroughly
2. Shake bottle
3. Ensure surfaces are cool to the touch
4. Apply a small amount to the surface, microfibre cloth or foam pad
5. BY HAND: Apply with a dry, clean microfibre cloth in light, cross hatch motions
BY MACHINE Polish with a foam pad (dual action 3500 opm or rotary 800 – 1100rpm)
6. Remove residue and buff with a soft, clean, dry microfibre cloth
7. Reapply if necessary