About: G Mop Standard Finishing Head
The G Mop Finishing Head has a soft, open cell structure to protect delicate paintwork, while removing swirls and leaving a deep gloss finish.
Ideal as a follow on after compounding with the G Mop Compounding Head
Use With...
"Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator? "Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator?
The "Cut Speed" & "Finish Level" presented on our product pages, upgraded G Mop packaging and infographics are intended as a rough guideline. Pad Performance and Results are dependent on numerous factors including the polish used, the surface / substrate being polished, machine speeds and user handling.
The products presented below are recommended for use with this applicator. In some cases there may be alternative applicator recommendations from Farécla to achieve a faster cut or a higher finish with that compound.
Farécla's Compounds, Polishes and Waxes will have recommended applicators either on the product packaging, process guides or in the supplemental material available on our website (product pages, solutions etc.).
Farécla advises following the process and products the compound / polish / wax recommends. Users should assess the level of correction needed before polishing, aiming to use the least aggressive pad that will still remove imperfections effectively.
When adjusting the process with alternative, non-recommended pads, Farécla recommended testing in a small or inconspicuous area first to ensure you are going to achieve the desired finish.
Farécla also offers accessories designed to improve the longevity and handling of applicators, and polishing machines; specially developed and specced to deliver optimal performance when used with our compounds and applicators.
Recommended Compounds
G3 Fine Finishing Compound offers rapid and permanent removal of minor surface defects, holograms and swirl marks from all modern paint systems. Superb on dark colours.
Profile 700 FINISH Light Cut Polish and Swirl Remover eliminates minor defects and swirls from paint, lacquer and gelcoat surfaces, leaving a mirror shine finish
G10 Finishing Compound is ideal for removing light scratches or swirl marks, especially on darker colours.
Enhance Performance and Improve Pad Longevity
The G Plus Spurring Brush is designed for manually cleaning G Mop pads and foams - unclogging foam cells to ensure no drop in cut or gloss and avoiding residue, dried compound and other contaminants impairing your next job.
Tools & Machines from Farécla
GPT002 & GPT003 | The G Plus Rotary Polisher has been developed to Farécla’s own specifications to deliver the ideal polishing machine for bodyshops and trade professionals.
GPT050 | The G Plus Cordless Rotary Polisher has been developed to Farécla’s own specification to be the battery powered equivalent of the popular corded polishing machine.
SKU(s)
G Mop Finishing Foams
75 mm & 150 mm | The G Mop Finishing Foam range has been specially designed for their excellent high gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Finishing Compounds and Waxes .
75 mm | The G Mop Premium Finishing Foam delivers the best results for gloss and handling – exceeding the already high standard of our existing G Mop 75 mm / 3″ Range mini applicators.
150 mm | The G Mop Angled Finishing Foam uses a new grade of foam which is slightly firmer than the grade used in previous Farécla Finishing Foams
200 mm | The G Mop Waffle Finishing Foam is a new soft-backed, waffle-faced compounding foam.