Compuesto Pulidor Súper Rápido G360

El Compuesto Pulidor Súper Rápido G360 puede utilizarse para eliminar el lijado de grano 3000 y pulir rápidamente desde P1500 hasta obtener un acabado de brillo profundo.

Para reemplazar el lijado con grano 3000, primero use una Almohadilla de Microfibra de Corte Súper Alto Farécla (GMC650), y luego elimine las marcas del proceso creadas por el paso 1 utilizando una Almohadilla de Espuma para Pulido en Ángulo G Mop (GMC622).

1. Asegúrese de que la superficie esté limpia, seca y fría al tacto. 
2. Agite bien el bote antes de usar. 
3. Aplique una pequeña cantidad de producto sobre la superficie y extiéndalo a través del área defectuosa.
4. Comience a 1500rpm con la Almohadilla de Microfibra de Corte Súper Alto en un ángulo leve, y termine a 900rpm con la almohadilla plana sobre la superficie. 
5. Cambie la almohadilla por la Almohadilla de Espuma para Pulido en Ángulo G Mop. 
6. Aplique una pequeña cantidad de producto sobre la superficie. 
7. Pula brevemente a 900-1300rpm. 
8. Limpie con una Bayeta de Microfibra G Plus y repita si es necesario.

1. No aplique en exceso – use entre un 30% y un 50% menos de compuesto de lo que normalmente usaría con otras marcas. Use con moderación: demasiado incurre en costos adicionales y innecesarios, más tiempo de limpieza, y puede obstruir la almohadilla, reduciendo la efectividad del corte.
2. Para un rendimiento óptimo en la eliminación de rasguños de lijado P1500, siempre use la Almohadilla de Microfibra de Corte Súper Alto. Esto reduce la necesidad de usar P3000, lo que reduce costos y tiempo de ciclo.
3. Cuando use una pulidora rotativa, asegúrese de que la velocidad de la máquina esté ajustada al nivel correcto entre 1500 y 1800 RPM: demasiado lento o demasiado rápido resultará en un bajo rendimiento del producto y aumentará el tiempo del ciclo de pulido.
4. Aplique presión ligera en la almohadilla. No se apoye en la pulidora ni la sostenga en un ángulo demasiado pronunciado: podría cortar más rápido algunas veces, pero pueden resultar hologramas y, por lo tanto, retoques.
5. No pula durante demasiado tiempo – esto puede poner micro-rasguños en las superficies, que luego tardan más tiempo en eliminarse. Los productos que tienen una película transparente pueden ayudar.
6. Amase una espuma nueva antes del primer uso y prímela con compuesto: esto evita cualquier "rasposidad" inicial y promueve un pulido más efectivo desde el principio.
7. Siempre estimule las almohadillas de pulido de espuma y lana regularmente. Lávelas con agua tibia y déjelas secar durante la noche para prolongar la vida útil de las almohadillas. La acumulación de compuesto de trabajos anteriores reducirá el corte y causará deslizamiento. El compuesto seco puede poner rasguños en la superficie.
8. Evite pulir pintura no completamente curada (prestando especial atención a la temperatura del panel del horno de curado y a los puntos fríos, configuraciones de pistola, técnica de rociado). La pintura blanda no puede pulirse de manera efectiva y puede requerir retoques en una etapa posterior.
9. Siempre use dos paños de microfibra (sucio y limpio): aprenda la técnica de doblado para siempre usar una sección limpia de microfibra para evitar dañar la superficie terminada.
10. Finalmente, un buen mantenimiento es fundamental para un resultado exitoso. Asegúrese de que todas las máquinas estén en un estado bien mantenido y limpio, asegúrese de que todas las almohadillas se laven y estimulen regularmente.

A Rotary polisher spins in a continuous circular motion, creating a direct and aggressive polishing action that is ideal for faster defect removal and heavier cutting applications.

A Dual Action (DA) polisher combines rotary and oscillating movements, producing a smoother and generally less aggressive polishing action that is commonly used for refining and finishing.

Although Rotary polishing will typically deliver a heavier cut, actual polishing performance depends on a range of factors including substrate type and condition, compound and applicator selection, machine speed, user handling and machine throw. In some spot repair situations, smaller orbit Dual Action machines such as the G Plus Mini Dual Action Polisher may achieve both rapid correction and a high finishing performance when head to head against its rotary counterpart.

Several G Mop applicators can be used across both Rotary and Dual Action polishing systems. Users should check product packaging and the product listings for compatibility guidance and recommended operating instructions.

Both machine types are capable of achieving high quality correction and finishing results in skilled hands. The choice between Rotary and Dual Action polishing often depends on the application, substrate condition, working area and operator preference.

Many Farécla process guides and solutions are designed around a preferred machine type. However, users with access to both Rotary and Dual Action polishers may mix and match recommended processes and product combinations according to operator preference and application requirements to achieve optimal results.

Yes. G360 Super Fast Compound can be used with both Rotary and Dual Action polishing systems when paired with the correct applicator and process.

Farécla currently offers two versions of the G Mop Super High Cut Pad designed for use with G360 Super Fast Compound:

• Red | GMC650 - Rotary use ONLY
• White | GMC660 & GMC760 - Dual Action use ONLY

See: What is the difference between the "RED" and "WHITE" G Mop Super High Cut Pads? for full details

When used with a Dual Action machine and the recommended applicators, G360 Super Fast Compound is capable of delivering strong correction and a high gloss finish as either a standalone process or as part of a wider polishing system.

See: Process Guide: G360 Super Fast System for DUAL ACTION Polishers for full details

Broadly speaking, Rotary polishing systems will typically deliver the fastest and most consistent higher correction performance with G360, particularly during heavier correction applications. However, some users may prefer Dual Action polishing for improved finishing characteristics, increased control or personal preference.

For users looking for a Dual Action-focused alternative, G3 Pro D.A. Cutting Compound is also recommended. Developed primarily with enthusiast and detailing users in mind, it is compatible with the recommended pads used within the G360 Dual Action process and offers a lower dusting polishing experience while still delivering strong correction performance.

Both the Rotary and Dual Action G360 Super Fast processes are designed to deliver rapid defect removal and a high gloss finish, but they differ in machine action and recommended applicators for certain stages of the process.

HIGH CUT - To remove P1500 or finer sanding marks
This stage eliminates P1500 sanding marks from conventional low bake clear coats and prepares the surface for MEDIUM CUT polishing.

• Rotary - G360 Super Fast Compound with a G Mop Super High Cut Pad [RED]
• Dual Action - G360 Super Fast Compound with a G Mop Super High Cut Pad [WHITE] 

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

MEDIUM CUT - To remove process marks and medium defects such as swirls and light scuffs
This stage rapidly eliminates heavier swirls and holograms, leaving an excellent gloss finish on light colours while preparing dark colours for FINE CUT polishing.

• Rotary & Dual Action - G360 Super Fast Compound with a G Mop Angled Yellow Compounding Foam

FINE CUT - To remove fine defects such as holograms and light swirls while enhancing gloss levels
This stage further enhances gloss levels on light colours while rapidly eliminating light swirls and holograms on dark colours for an enhanced deep gloss finish.

• Rotary - G360 Super Fast Finish with a G Mop Angled Black Finishing Foam
• Dual Action - G360 Super Fast Finish with a G Mop Dual Action Finishing Foam

The recommended finishing pads for Rotary and Dual Action polishing are designed to offer optimal handling, machine stability and airflow characteristics for their respective machine actions.

Broadly speaking, Rotary polishing is commonly favoured for fast and consistent higher correction performance, while Dual Action polishing is often preferred for increased control and enhanced finishing characteristics.

The choice between Rotary and Dual Action polishing will depend on operator preference, substrate condition, working area and the finish standard required. Users with access to both machine types may also combine elements of each process to suit the application and optimise overall performance.

For further details, see:

• Process Guide: G360 Super Fast System for ROTARY Polishers
• Process Guide: G360 Super Fast System for DUAL ACTION Polishers
• What is the difference between the "RED" and "WHITE" G Mop Super High Cut Pads?

Farécla offers two types of G Mop Super High Cut Pad(s):

The RED Pad
150 mm Range: GMC650 (78072700153) 
Introduced alongside G360 Super Fast Compound, this pad is recommended for use with ROTARY polishing processes.

The WHITE Pad
150 mm Range: GMC660 (66254427056)
180 mm Range: GMC760 (66254427057)
Introduced in 2026, this pad is recommended for use with DUAL ACTION polishing processes.

Both pads are designed for use with G360 Super Fast Compound and will remove P1500 or finer sanding scratches when used as part of the correct process.

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

For best performance, Farécla recommends:
GMC650 – Rotary use ONLY
GMC660 & GMC760 – Dual Action use ONLY

Further guidance is available in the related FAQs: 

• Can GMC650 be used with a DUAL ACTION Polishing Machine?
• Can GMC660 be used with a ROTARY Polishing Machine?

NOTE: Due to an administrative error, some early “new look” packaging (see “G Mop Applicator Range – Packaging Update”) for GMC650 and GMC660 incorrectly suggest cross-use between rotary and dual action polishing machines. Artwork has been updated, and future production runs will carry the revised information