Acabado Súper Rápido G360

El Acabado Súper Rápido G360 se puede utilizar para mejorar aún más los niveles de brillo en colores claros y en colores oscuros para eliminar rápidamente pequeños remolinos y hologramas y dejar un acabado de brillo profundo mejorado.

Farécla recomienda usarlo con la Almohadilla de Espuma para Acabado en Ángulo G Mop (GMF622) - la velocidad recomendada puede variar dependiendo del aplicador elegido.

1. Asegúrese de que la superficie esté limpia, seca y fresca al tacto. 
2. Agite bien el envase antes de usarlo. 
3. Aplique una pequeña cantidad de producto sobre la superficie. 
4. Distribuya el producto sobre la superficie y pula a 800 - 1100 RPM. 
5. Trabaje en áreas pequeñas a la vez, manteniendo el aplicador plano sobre la superficie. 
6. Limpie con un paño limpio y repita si es necesario.

A Dual Action (DA) polisher combines rotary and oscillating movements, creating a smoother and generally less aggressive polishing action. This makes DA polishers popular for refining, finishing and reducing the risk of holograms or swirl marks during polishing.

A Rotary polisher spins in a continuous circular motion, delivering a more direct and aggressive cutting action that is well suited to heavier defect removal and faster correction speeds.

While Rotary polishing is broadly considered more aggressive than Dual Action polishing, actual cut speed and finish levels will vary depending on several factors including substrate condition and age, compound and applicator choice, machine speed, user technique and the size and throw of the machine being used. For example, the tighter orbit and high speed of the G Plus Mini Dual Action Polisher can, in some spot repair applications, deliver both faster correction and finishing than its rotary compound.

Some G Mop applicators are compatible across both Rotary and Dual Action machine types. Users should check product packaging and the product listings for compatibility guidance and recommended operating instructions.

Although both machine types have their own strengths, the polishing action itself does not limit the achievable finish. An experienced operative can achieve high levels of correction and finishing with either Rotary or Dual Action systems when used correctly.

Many Farécla process guides and solutions are designed around a preferred machine type. However, users with access to both Rotary and Dual Action polishers may mix and match recommended processes and product combinations according to operator preference and application requirements to achieve optimal results.

Yes. G360 Super Fast Compound can be used with both Rotary and Dual Action polishing systems when paired with the correct applicator and process.

Farécla currently offers two versions of the G Mop Super High Cut Pad designed for use with G360 Super Fast Compound:

• Red | GMC650 - Rotary use ONLY
• White | GMC660 & GMC760 - Dual Action use ONLY

See: What is the difference between the "RED" and "WHITE" G Mop Super High Cut Pads? for full details

When used with a Dual Action machine and the recommended applicators, G360 Super Fast Compound is capable of delivering strong correction and a high gloss finish as either a standalone process or as part of a wider polishing system.

See: Process Guide: G360 Super Fast System for DUAL ACTION Polishers for full details

Broadly speaking, Rotary polishing systems will typically deliver the fastest and most consistent higher correction performance with G360, particularly during heavier correction applications. However, some users may prefer Dual Action polishing for improved finishing characteristics, increased control or personal preference.

For users looking for a Dual Action-focused alternative, G3 Pro D.A. Cutting Compound is also recommended. Developed primarily with enthusiast and detailing users in mind, it is compatible with the recommended pads used within the G360 Dual Action process and offers a lower dusting polishing experience while still delivering strong correction performance.

Both the Rotary and Dual Action G360 Super Fast processes are designed to deliver rapid defect removal and a high gloss finish, but they differ in machine action and recommended applicators for certain stages of the process.

HIGH CUT - To remove P1500 or finer sanding marks
This stage eliminates P1500 sanding marks from conventional low bake clear coats and prepares the surface for MEDIUM CUT polishing.

• Rotary - G360 Super Fast Compound with a G Mop Super High Cut Pad [RED]
• Dual Action - G360 Super Fast Compound with a G Mop Super High Cut Pad [WHITE] 

While similar in appearance, subtle differences in dimensions, foam structure and the fibres of the polishing face mean they behave differently in use. As a result, each pad requires a specific handling approach for optimal control and to avoid introducing additional surface defects.

MEDIUM CUT - To remove process marks and medium defects such as swirls and light scuffs
This stage rapidly eliminates heavier swirls and holograms, leaving an excellent gloss finish on light colours while preparing dark colours for FINE CUT polishing.

• Rotary & Dual Action - G360 Super Fast Compound with a G Mop Angled Yellow Compounding Foam

FINE CUT - To remove fine defects such as holograms and light swirls while enhancing gloss levels
This stage further enhances gloss levels on light colours while rapidly eliminating light swirls and holograms on dark colours for an enhanced deep gloss finish.

• Rotary - G360 Super Fast Finish with a G Mop Angled Black Finishing Foam
• Dual Action - G360 Super Fast Finish with a G Mop Dual Action Finishing Foam

The recommended finishing pads for Rotary and Dual Action polishing are designed to offer optimal handling, machine stability and airflow characteristics for their respective machine actions.

Broadly speaking, Rotary polishing is commonly favoured for fast and consistent higher correction performance, while Dual Action polishing is often preferred for increased control and enhanced finishing characteristics.

The choice between Rotary and Dual Action polishing will depend on operator preference, substrate condition, working area and the finish standard required. Users with access to both machine types may also combine elements of each process to suit the application and optimise overall performance.

For further details, see:

• Process Guide: G360 Super Fast System for ROTARY Polishers
• Process Guide: G360 Super Fast System for DUAL ACTION Polishers
• What is the difference between the "RED" and "WHITE" G Mop Super High Cut Pads?