About: G3 Pro Multicleaner
G3 Pro Multicleaner is a solvent-free, powerful cleaner for fabric and hard surfaces.
Multicleaner is a rigorous yet safe all purpose cleaner (APC) for use on all soft and hard surfaces, including engine bays, wheel arch liners, carpets and upholstery.
Multicleaner breaks down grease and dirt upon contact.
It is a silicone-free cleaning product that will not discolour rubber, plastics, vinyl or fabric.
For maximum performance use neat, but it can be diluted with water for lighter contamination.
SKU(s)
Use With...
For Leather Surfaces
FAQs & How to Use
How to Use: G3 Pro Multicleaner How to Use: G3 Pro Multicleaner
1. For interior, if needed, vacuum all upholstery and carpets
For interior and exterior, spray onto the area to be cleaned or onto a clean, dry cloth
2. Agitate with a brush or a clean, dry cloth if needed
3. Repeat for heavily soiled areas
4. Do not allow to dry fully
5. Remove any residue with a clean, dry cloth
Can I dilute G3 Pro Multicleaner? Can I dilute G3 Pro Multicleaner?
G3 Pro Multicleaner is a concentrated all-purpose cleaner and can be diluted to your desired strength, anywhere from neat for maximum cleaning power to 10 parts water to 1 part Multicleaner.
G3 PRO MULTICLEANER DILUTION RATIOS
- Interior – Dilute up to 10:1 (water:solution), for heavily soiled surfaces it can also be applied neat.
- Exterior – Use neat for heavy dirt, dilute up to 2:1 (water:solution) for maintenance clean.
- Engine Bay – Use neat to break down oily residue. Through a foam lance – Within the foam lance bottle mix 250ml of solution to 750ml of water
- Wheel arches – Use neat, or up to 2:1 (water:solution) for maintenance.
- Tyres – Use neat, or up to 2:1 (water:solution) for maintenance.
Can I use G3 Pro Multicleaner prior to using shampoo? Can I use G3 Pro Multicleaner prior to using shampoo?
Most definitely yes, G3 Pro Multicleaner will assist in lifting heavy dirt, dust and road grime prior to using your car shampoo
Can I use G3 Pro Multicleaner with a pressure washer? Can I use G3 Pro Multicleaner with a pressure washer?
Yes, G3 Pro Multicleaner is suitable for use with pressure washers that have built-in detergent tanks or the accessory of a snow foam lance. Adjust the dilution depending on your application.
How do I clean an engine bay with G3 Pro Multicleaner? How do I clean an engine bay with G3 Pro Multicleaner?
Check out our dedicated solutions page: How to Effectively (and Safely) Clean an Engine Bay
Apply G3 Pro Multicleaner directly and agitate with a brush to loosen oil and grease, leave for 5 minutes and simply rinse off with water and dry, taking care around all electrical components.
CLEAN with G3 Pro
Recent Changes
Variant | Format | FPL Part No. | SGA UPC | Barcode | Carton Qty |
---|---|---|---|---|---|
1 US Gallon | Container | 7220 | 78072706614 | 842090100426 | 1 Container(s) |
5 US Gallons | Container | 7221 | 78072717220 | 842090100440 | 1 Container(s) |