G3 Pro Deep Clean Clay Mitt
7191 (78072706632)
G3 PRO DEEP CLEAN CLAY MITT
- Advanced rubber polymer technology
- Easy to use alternative to a traditional clay bar
- Easily removes ingrained dirt, bugs, tar spots and dulling pollutants from paintwork, windscreens and headlights
- Lasts up to 5x longer than traditional clay bars
- Use with: G3 Pro Rapid Detailer 2.0
About: G3 Pro Deep Clean Clay Mitt
G3 Pro Deep Clean Clay Mitt removes ingrained dirt that causes dulling and minor defects when used with a G3 Pro Detailer.
This revolutionary, re-usable Deep Clean Clay Mitt uses an advanced rubber polymer technology that easily removes ingrained dirt, bugs, tar spots and dulling pollutants from paintwork, windscreens and headlights. An easy to use alternative to a traditional clay bar.
IMPORTANT – The G3 Pro Deep Clean Clay Mitt requires lubricant for application; use with a G3 Pro Detailer or Shampoo to lubricate the surface, allowing the mitt to glide across the surface.
SKU(s)
Use With...
FAQs & How to Use
How to Use: G3 Pro Deep Clean Clay Mitt How to Use: G3 Pro Deep Clean Clay Mitt
1. Clean surface thoroughly
2. Lightly spray the area to be cleaned and the mitt with G3 Pro Rapid Detailer, G3 Pro Rapid Detailer 2.0 or use with G3 Pro Shampoo
3. Wipe over the surface with the clay side of the mitt
4. Wipe clean with the cloth side of the mitt
CAUTION: Always keep the G3 Pro Deep Clean Clay Mitt lubricated. Do not use dry.
After use, rinse off accumulated contaminants on the clay side and allow to dry.
NB unlike a clay bar, if dropped you do not need to discard the Clay Mitt, just rinse thoroughly in clean water.
Do I need to clay my car? Do I need to clay my car?
Your eye may not see contaminants bonded your paint that washing alone will not remove. A quick test to see if claying your car would be of benefit is lightly run your hand over the bodywork. Any grittiness felt are the contaminants such as iron particles, tree sap and bug remnants.
The G3 Pro Deep Clean Clay Mitt will lift these particles from paintwork and glass, leaving a smooth finish ready for finishing with a sealant or wax.
Run your hand lightly over the surface after using the clay mitt to feel the difference.
What Should I Use to Lubricate the G3 Pro Deep Clean Clay Mitt? What Should I Use to Lubricate the G3 Pro Deep Clean Clay Mitt?
We recommend using G3 Pro Rapid Detailer as a lubricant for the G3 Pro Deep Clean Clay Mitt as its gentle formulation will not degrade the clay pad.
Alternatively a concentrate shampoo and water solution can provide be used to lubricate the surface.
Whichever method is used, it is important to ensure the mitt and surface are well lubricated at all times!
How do I remove tar spots from my G3 Pro Deep Clean Clay Mitt? How do I remove tar spots from my G3 Pro Deep Clean Clay Mitt?
As you work over your car’s surface, the mitt effectively removes small tar spots from the paint and these can sometimes stick to the clay pad.
If you are having this issue, you can remove them by gently massaging undiluted Washing Up Liquid into the spots.
How do I store my G3 Pro Deep Clean Clay Mitt in-between uses? How do I store my G3 Pro Deep Clean Clay Mitt in-between uses?
After use, the G3 Pro Deep Clean Clay Mitt needs to be allowed to dry out naturally – for this, you can hang it up on a hook using the tag/loop on the side. Once dried, you should then keep it in a resealable plastic bag.