About: G Mop Angled Black Finishing Foams
The G Mop Angled Finishing Foam uses a new grade of foam which is slightly firmer than the grade used in previous Farécla Finishing Foams
This foam offers a significant uplift in handling, speed of hologram & swirl removal, and depth of gloss achieved, without compromising on flexibility (especially when used with a G Mop Flexible Backplate).
It also generates less friction with the panel, further enhancing the handling properties and perfectly complements the new formulation of G360 Super Fast Finish.
Also Available: G Mop Angled Compounding Foam
Use With…
"Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator? "Use With..." Recommendation | What Compounds / Polishes / Waxes can I use with this Applicator?
The "Cut Speed" & "Finish Level" presented on our product pages, upgraded G Mop packaging and infographics are intended as a rough guideline. Pad Performance and Results are dependent on numerous factors including the polish used, the surface / substrate being polished, machine speeds and user handling.
The products presented below are recommended for use with this applicator. In some cases there may be alternative applicator recommendations from Farécla to achieve a faster cut or a higher finish with that compound.
Farécla's Compounds, Polishes and Waxes will have recommended applicators either on the product packaging, process guides or in the supplemental material available on our website (product pages, solutions etc.).
Farécla advises following the process and products the compound / polish / wax recommends. Users should assess the level of correction needed before polishing, aiming to use the least aggressive pad that will still remove imperfections effectively.
When adjusting the process with alternative, non-recommended pads, Farécla recommended testing in a small or inconspicuous area first to ensure you are going to achieve the desired finish.
Farécla also offers accessories designed to improve the longevity and handling of applicators, and polishing machines; specially developed and specced to deliver optimal performance when used with our compounds and applicators.
Recommended Compounds (Automotive Refinishing)
G360 Super Fast Finish is designed to rapidly eliminate swirls and holograms from painted and lacquered automotive surfaces - ideal on darker colours after using G360 Compound.
G3 Fine Finishing Compound offers rapid and permanent removal of minor surface defects, holograms and swirl marks from all modern paint systems. Superb on dark colours.
G3 Wax Premium Liquid Protection is a finishing wax specifically developed for trade use; quick and easy to apply and provides a durable, high gloss finish on fully cured paintwork.
G3 Glaze Gloss Enhancer is a protective product with excellent filling capabilities for minor scratches and swirls.
Recommended Compounds (Marine and Industrial)
Profile 700 FINISH Light Cut Polish and Swirl Remover eliminates minor defects and swirls from paint, lacquer and gelcoat surfaces, leaving a mirror shine finish
Profile Polymer UV Wax for Machine Application is an easily applied wax containing UV inhibitors that provides up to 3 months protection and gloss on paint, lacquer and gelcoat surfaces.
Enhance Performance and Improve Pad Longevity
For 150 mm & 200 mm Pads | The G Mop Flexible Back Plate adds additional flexibility to Farécla's range of compounding and finishing foams - allowing for improved handling performance, increased performance and increased pad life.
The G Plus Spurring Brush is designed for manually cleaning G Mop pads and foams - unclogging foam cells to ensure no drop in cut or gloss and avoiding residue, dried compound and other contaminants impairing your next job.
SKU(s)
G Mop Finishing Foams
75 mm & 150 mm | The G Mop Finishing Foam range has been specially designed for their excellent high gloss properties, minimal throw off (mess) and a low operating temperature when used with Farécla’s range of Finishing Compounds and Waxes .
75 mm | The G Mop Premium Finishing Foam delivers the best results for gloss and handling – exceeding the already high standard of our existing G Mop 75 mm / 3″ Range mini applicators.
150 mm | The G Mop Angled Finishing Foam uses a new grade of foam which is slightly firmer than the grade used in previous Farécla Finishing Foams
200 mm | The G Mop Waffle Finishing Foam is a new soft-backed, waffle-faced compounding foam.
G Mop Compounding Foams
75 mm & 150 mm | Eliminates sanding scratches and swirls when used with medium to high cut compounds on paint, lacquer and GRP finishes.
75 mm | The grade of foam used by the G Mop Premium Compounding Foam provides the best results for cut, gloss and handling – exceeding the already high standard of our existing G Mop 75 mm / 3″ Range mini applicators.
150 mm & 180 mm | The G Mop Yellow Angled Compounding Foam provides an improved cut and gloss of our standard yellow pads, with enhanced handling over our previous flexible yellow pads.
200 mm | The G Mop Waffle Compounding Foam is a new soft-backed, waffle-faced compounding foam.
Recent Changes
| Variant | Format | FPL Part No. | SGA UPC | Barcode | Carton Qty |
|---|---|---|---|---|---|
| 150 mm / 6 in (Flexible) | Pack of 2 Foams | GMF624 | 78072700156 | 842090101386 | 12 Pack(s) |