Profile 400 Advanced Plus Liquid Compound
PRA101 (78072715147) | +1 More SKU(s)
PROFILE 400 ADVANCED PLUS FAST MEDIUM LIQUID COMPOUND
- Rapidly eliminates P1500 sanding marks and defects from paint, lacquer, acrylic, plexiglass and gelcoat surfaces
- Can be used as a high gloss one-step process on white production gelcoats if sanded to P1200 or P1500
- Can also be used on painted surfaces
- Use on Paint / Aerospace paints or lacquers and Polyester / Vinylester / Epoxy resins or gelcoats
- No Silicones
About: Profile 400
Profile 400 Advanced Plus Fast Medium Liquid Compound eliminates P1500 sanding marks and defects from paint, lacquer, acrylic, plexiglass and gelcoat surfaces, leaving a high gloss.
Profile 400 Advanced Plus offers the highest level of cut and gloss on painted surfaces and wood lacquers in the range and is likely to require a second finishing step – a much appreciated time-saving in high volume operations.
It can be used as a high gloss one-step process on white production gelcoats if sanded to P1200 or P1500.
SKU(s)
Use With...
Single-Sided Cutting Wool Pad with 100% steamed and twisted white wool designed to eliminate severe swirls, scratches or heavy oxidation from sanded or wet sanded refinished paint surfaces.
G-Mop Single-Sided Lambswool Pad eliminates swirl marks and fine scratches. For use with a final polish or glaze to create exceptional shine.
G-Mop Wool Compounding Pad operates at a consistent level of aggressiveness for extended periods of time.
8" CCS Waffle White Cutting Foam Pad is used for removing sanding scratches, deep scratches, oxidation, and weathered paint.
Orange Single-Sided CCS Foam Waffle Pad used for removing sanding scratches, deep scratches, oxidation, and weathered paint.
Follow On With...
Profile 700 FINISH Light Cut Polish and Swirl Remover eliminates minor defects and swirls from paint, lacquer and gelcoat surfaces, leaving a mirror shine finish
Clean and Protect is an easy to use “wipe on, wipe off” product - rapidly removing contaminants from paint, glass, rubber and plastics, whilst leaving a silicone-free layer of protection to the surface
FAQs
How to Use: Profile 400 Advanced Plus Fast Medium Cut Compound [EN]
How to Use: Profile 400 Advanced Plus How to Use: Profile 400 Advanced Plus
If needed, before polishing, sand up to:
- P1500 or finer (Paint or lacquer)
- P2000 or finer (Aerospace paint or lacquer)
- P1200 or finer (Polyester resin or gelcoat)
- P1500 or finer (Vinylester resin or gelcoat)
- P1500 or finer (Epoxy resin or gelcoat)
Recommended Applicator:
Buffing/Polishing H&L Super Cut Wool Pad - 1500-1800 RPM
Yellow Single-Sided Blended Wool Pad - 1500-1800 RPM
Black Single-Sided CCS Foam Waffle Pad - 800-1100 RPM
- Ensure surface is clean, dry and cool to the touch
- Shake bottle well before use
- Apply a small amount of product to the applicator
- Spread over the surface and polish (speed depends on applicator used)
- Work in small areas at a time, keeping the applicator flat to the surface
- Wipe clean and repeat if necessary