Profile 700 Finish Light Cut Polish and Swirl Remover
PRF112 (78072763898) | +1 More SKU(s)
PROFILE 700 FINISH LIGHT CUT POLISH & SWIRL REMOVER
- Enhanced workability
- Very easy wipe off
- Use on Paint / Aerospace paints or lacquers and Polyester / Vinylester / Epoxy resins or gelcoats
- Now VOC-free
- No Silicones
About: Profile 700
Profile 700 FINISH Light Cut Polish and Swirl Remover eliminates minor defects and swirls from paint, lacquer and gelcoat surfaces, leaving a mirror shine finish
Often used as a second step after compounding, Profile 700 is a very fine finishing compound designed to remove any light swirl marks and holograms from high quality painted lacquered and gel coat surfaces to leave the ultimate high gloss finish. It will not scratch and is particularly good on soft coatings which are susceptible to swirl marks.
For optimum performance, use with a G Mop Finishing Foam.
SKU(s)
Use With...
Follow On With...
FAQs & How to Use
How to Use: Profile 700 Finish How to Use: Profile 700 Finish
For swirl removal and a high gloss finish, use on its own or in a 2 step process after:
- Profile 200 Select (Polyester, Vinylester and Epoxy resin / gelcoat)
- Profile 400 Advanced Plus (Paint lacquer and Epoxy resin / gelcoat)
Recommended Applicator:
- G Mop Finishing Foam (Black) - 800-1100 RPM
- G Mop Lambs Wool Pad - 800-1100 RPM
1) Ensure surface is clean, dry and cool to the touch
2) Shake bottle well before use
3) Apply a small amount of product to the applicator
4) Spread over the surface and polish (speed depends on applicator used)
5) Work in small areas at a time, keeping the applicator flat to the surface
6) Wipe clean and repeat if necessary
Recent Changes
As part of the 2022 Profile Relaunch; Profile Finish was reformulated to be entirely VOC-free and offer enhanced workability and very easy wipe-off.
This New & Improved Formula is the above listing; Profile 700 Finish
SKUs containing the older formulation; PRF101 (SGA 78072700164) and PRF106 (SGA 78072717214) have been discontinued.