About: Profile 100
Profile 100 EXTRA Heavy Cut Paste Compound - commonly dubbed "liquid sandpaper" - is a coarse, aggressive, water-based compounding paste for tough resins and gelcoats.
It removes P600 dry sanding marks from most substrates, leaving a relatively low gloss finish.
Ideal for plugs and moulds.
Profile 100 Extra is often used in the first stage of a two-step polishing process when high gloss is required.
For a better gloss on tough resins and gelcoats follow on with Profile 200 Select.
Profile 200 Select can be followed on by Profile 700 for further enhanced gloss and swirl / hologram removal.
SKU(s)
Variant
Format
FPL Part No.
SGA UPC
Barcode
Carton Qty
Carton Barcode
Use With...
Follow On With...
FAQs & How to Use
How to Use: Profile 100 Extra How to Use: Profile 100 Extra
If needed, before polishing, sand up to:
- P600 or finer (Polyester resin or gelcoat)
- P600 or finer (Vinylester resin or gelcoat)
- P800 or finer (Epoxy resin or gelcoat)
Recommended Applicator:
- G Mop Twisted Wool Pad - 1500-1800 RPM
- Ensure surface is clean, dry and cool to the touch
- Mix product well before use
- Apply a small amount of product to the applicator
- Spread over the surface and polish (speed depends on applicator used)
- Work in small areas at a time, keeping the applicator flat to the surface
- Wipe clean and repeat if necessary
Recent Changes
- The 3.2 kg SKU (PRE301 / SGA 78072718073) has been discontinued – the decision to change to 3 kg was made to reduce the risk of breakages during international shipping. The price per pot has been reduced pro rata.
- PRE306 also moves away from 100% virgin plastic into a pot that contains a significant proportion of recycled plastic. As a consequence, the new pot and lid are grey not white.