G3 Extra Plus Abrasive Compound
G3E124 (78072723895) | +1 More SKU(s)
G3 EXTRA PLUS ABRASIVE COMPOUND
- Medium to High Cut
- Permanent results fast - no fillers
- Excellent cutting action, even on hard paints
- Will remove P1500 or finer sanding marks leaving a good gloss finish
- Minimal throw-off and wipes off easily with a G Plus Finishing Cloth
- Bodyshop Safe (No Silicones)
About: G3 Extra Plus
G3 Extra Plus Abrasive Compound is a high quality, fast cutting, step 1 product for the removal of P1500 or finer sanding marks from all modern paint systems. Contains no fillers or silicones so scratch marks will not reappear.
For best results, compound at 900 – 1300rpm using either a G Mop Yellow Compounding Foam or higher performing, G Mop High Cut Foam.
Follow with G3 Fine Finishing Compound and a G Mop Finishing Foam to remove any swirls and holograms that might remain, to leave a heightened gloss finish.
G3 Extra Plus is only available in select markets.
SKU(s)
Use With...
Follow On With...
G360 Super Fast Compound is designed to rapidly eliminate sanding marks and minor defects from painted and lacquered automotive surfaces.
FAQs & How to Use
How to Use: G3 Extra Plus How to Use: G3 Extra Plus
1. Attach a G Mop 8” Wool Pad, Lambswool or Foam Pad to a polishing machine
2. Shake bottle well before use
3. Dispense a small quantity of product onto surface or pad
4. Compound at 900 - 1300rpm
5. Wipe clean with a G Plus Finishing Cloth
What's the difference between the G3 Premium System and the G3 Extra System? What's the difference between the G3 Premium System and the G3 Extra System?
Farécla’s G3 Premium System is designed to be used on Ultra High Solids and Scratch Resistant Clearcoats and should be applied with foam pads, whilst the G3 Extra System works with Medium and High Solids paint systems using wool applicators.