G3 PRO - AVAILABLE IN-STORE AND ONLINE AT HALFORDS

The G3 Pro range from Farécla brings years of expertise in paint repair and restoration and instills them into a range of interior and exterior detailing products for car care enthusiasts and professional detailers alike:

CLEAN the surface in the safest way to prevent damage. 
RESTORE the surface after cleaning to enhance its condition. 
FINISH by sealing the restored surface, to protect and enrich the shine.

The G3 Pro range can be used on a wide variety of surfaces, across cars, motorbikes, boats, caravans, and motorhomes.

Halfords stocks a number of versatile products from the G3 Pro range which can be used to...

...and more!

The G3 Pro Deep Clean Clay Mitt, Multicleaner, Rapid Detailer 2.0, All-in-One Polish, Scratch Remover (Paste and Liquid), SuperGloss Paste Wax 2.0 and Waffle Pads are available online from Halfords.com and in store across the nation from February 2024; in addition to the G3 Pro D.A. Cutting Compound and Fine Polish for enthusiasts and detailers.

Find your nearest Halfords store here or via the Halfords website.

CLEAN with G3 Pro
RESTORE with G3 Pro
FINISH with G3 Pro
APPLY with G3 Pro
For Polishing Enthusiasts
  • G3 Pro - Dual Action Cutting Compound Product Shot with two in-use images
    G3 Pro Dual Action Cutting Compound
    Part No. 7500

    EASY HANDLING, LOW DUSTING PAINT CORRECTION LIQUID - USED WITH A DUAL ACTION POLISHING MACHINE

    Available from Halfords.com
    Product Page (Farecla.com)

  • G3 Pro - Dual Action Fine Polish Product Shot with two in-use images
    G3 Pro Dual Action Fine Polish
    Part No. 7501

    REMOVES LIGHT IMPERFECTIONS FOR A MIRROR SHINE FINISH - WHEN USED WITH A DUAL ACTION POLISHING MACHINE

    Available from Halfords.com
    Product Page (Farecla.com)

See the Range

SEE MORE "HOW TO" GUIDES - TRY OUR SOLUTION FINDER

How to Use

SEAT Leon Cupra 300 Detailing | @G3Professional

00:02:04
How to Use: G3 Pro Deep Clean Clay Mitt How to Use: G3 Pro Deep Clean Clay Mitt

1. Clean surface thoroughly

2. Lightly spray the area to be cleaned and the mitt with G3 Pro Rapid Detailer, G3 Pro Rapid Detailer 2.0 or use with G3 Pro Shampoo

3. Wipe over the surface with the clay side of the mitt

4. Wipe clean with the cloth side of the mitt

CAUTION: Always keep the G3 Pro Deep Clean Clay Mitt lubricated. Do not use dry.

After use, rinse off accumulated contaminants on the clay side and allow to dry.

NB unlike a clay bar, if dropped you do not need to discard the Clay Mitt, just rinse thoroughly in clean water.

How to Use: G3 Pro Rapid Detailer 2.0 How to Use: G3 Pro Rapid Detailer 2.0

1. Spray a light mist of product onto the surface

2. Use a Farécla G Plus Finishing Cloth to spread the product and clean the surface, wiping off polishing residues glue, lines etc.

3. Use a dry area of the cloth, or ideally a second, clean dry Farécla G Plus Finishing Cloth to buff the surface

Note: for tougher contamination like birdlime allow the product to dwell for a few seconds before wiping

FOR INGRAINED DIRT

1. Having first washed the surface, spray G3 Pro Rapid Detailer onto both the selected work area and a G3 Pro Deep Clean Clay Mitt

2. Gently work the mitt over the lubricated surface with light pressure without letting it dry. CAUTION: Keep the G3 Pro Deep Clean Clay Mitt lubricated during use

3. Buff off any residue with a soft, clean, dry microfibre cloth using a light circular motion. The surface should now feel smooth to the touch

How to Use: G3 Pro Multicleaner How to Use: G3 Pro Multicleaner

1. For interior, if needed, vacuum all upholstery and carpets
For interior and exterior, spray onto the area to be cleaned or onto a clean, dry cloth
2. Agitate with a brush or a clean, dry cloth if needed
3. Repeat for heavily soiled areas
4. Do not allow to dry fully
5. Remove any residue with a clean, dry cloth

How to Use: G3 Pro All-in-One Polish How to Use: G3 Pro All-in-One Polish

1. Wash and dry surface thoroughly
2. Shake bottle
3. Ensure surfaces are cool to the touch
4. Apply a small amount to the surface, microfibre cloth or foam pad
5. BY HAND: Apply with a dry, clean microfibre cloth in light, cross hatch motions
BY MACHINE Polish with a foam pad (dual action 3500 opm or rotary 800 – 1100rpm)
6. Remove residue and buff with a soft, clean, dry microfibre cloth
7. Reapply if necessary

How to Use: G3 Pro Scratch Remover Liquid How to Use: G3 Pro Scratch Remover Liquid

1. Wash surface thoroughly
2. Ensure surfaces are cool to the touch
3. Dampen a G3 Pro White Waffle Applicator Pad
4. Apply a small amount of product to the pad
5. Rub in a back and forth motion
6. Buff off with a clean, dry, soft microfibre cloth
7. Reapply if necessary 

How to Use: G3 Pro Scratch Remover Paste How to Use: G3 Pro Scratch Remover Paste

1. Wash surface thoroughly
2. Ensure surfaces are cool to the touch
3. Dampen a G3 Pro White Waffle Applicator Pad
4. Apply a small amount of product to the pad
5. Rub in a back and forth motion
6. Buff off with a clean, dry, soft microfibre cloth
7. Reapply if necessary

How to Use: G3 Pro SuperGloss Paste Wax 2.0 How to Use: G3 Pro SuperGloss Paste Wax 2.0

1. Ensure the surface is clean before use and cool to the touch (do not use in direct sunlight)
2. Apply wax to a G3 Pro Black Waffle Applicator Pad
3. Use circular overlapping motions with even pressure, avoiding plastic trims
4. Allow to dry to a haze. Can be left even for an extended period and will still buff off exceptionally easily
5. Gently wipe with a clean, dry microfibre cloth