Mould Production & Repair: Tooling Gel Coat

THE RESULT

Flawless, smooth, defect-free surface on standard or hard tooling gel coat, to limit the reworks needed on finished pieces.

Option 1
Sand Sand

Finish sanding to
P600
if needed on heavier defects.

This grade may change
if using an alternative
compound or applicator.

Stage 1: Cut Stage 1: Cut

Profile Extra Coarse Cut Compound
PRE301 (3.2kg)

G Mop 8” Twisted Wool Compounding Pad
GMW801 (single sided)
GMW806 (double sided)

Option 2
Sand Sand

Finish sanding to
P800
if needed on heavier defects.

This grade may change
if using an alternative
compound or applicator.

Stage 1: Cut Stage 1: Cut

Profile Select Liquid Compound
PRS101 (1 ltr)
PRS106 (1 US gallon)
PRS506 (5 US gallons)

G Mop 8” Twisted Wool Compounding Pad*
GMW801 (single sided)
GMW806 (double sided)

Use Minimal Pressure

*For a better gloss, use a G Mop Lambs Wool Pad GML301 (3” / 75mm), GML601 (6” / 150mm) or GML801 (8” / 200mm).